Rattan-Geflecht für
Medienmöbel-Türen

It is a woven material used as an insert in a framed cabinet door. Three material options are available: natural rattan for genuine cane character, PVC for a synthetic woven finish, and paper webbing made from rolled paper strands. The webbing is a furniture component, not a complete ventilation or electronics system.

Some open-weave door designs may allow infrared commands to reach the receiver. Performance depends on the weave, backing, receiver location, distance and angle. Test the actual assembled door and device. We do not state a universal IR transmission percentage.

No material insert alone can guarantee this. Follow the exact device manual, provide the required clearances and ventilation, and validate the enclosure. Do not place a device in a cabinet if its manufacturer’s placement requirements cannot be met.

Woven cane can be explored for decorative speaker fronts, but it is not automatically equivalent to acoustically tested grille cloth. Validate the finished grille’s frequency response, mounting and vibration behaviour before specifying it for a speaker or amplifier.

Choose natural rattan when genuine cane texture and natural variation are part of the design. Review PVC when the project calls for a synthetic woven finish and specific colour options. Consider paper webbing for a regular woven surface in dry indoor decorative panels, confirming whether a fibre core is needed. Compare physical samples for appearance, fixing and intended use; no material is automatically best for every cabinet.

Paper webbing can be considered for framed decorative cabinet inserts in dry interiors. Confirm the weave, fibre-core construction, mounting and exposure conditions. For electronics or speaker compartments, assess the final panel with the complete cabinet or audio system; paper construction alone does not establish ventilation, IR or acoustic performance.

Colour, pattern and width requests can be reviewed against the selected material and quantity. Pre-tensioned or ready-framed panels require a separate feasibility review; they are not offered here as a confirmed standard product.

The method depends on the material and frame. Share the groove, retaining strip, edge allowance or other fixing detail. Test retention, flatness and appearance on a prototype; natural rattan, PVC and paper may require different preparation and fixing methods. Do not apply natural cane soaking instructions to PVC or paper without confirming the selected material’s instructions.

Send the material or reference photo, colour, required width, door dimensions, estimated roll quantity and delivery country. We will confirm the available specification, sample arrangements, MOQ and lead time before quotation.